3204_0 - Hitec HS-645MG Super Torque Servo 3204_0 - Hitec HS-645MG Super Torque Servo 198,95 PLN
3002_0 - Kabel czujnikowy 60 cm 3002_0 - Kabel czujnikowy 60 cm 8,19 PLN
1057_1 - Moduł szybkiego enkodera USB 1057_1 - Moduł szybkiego enkodera USB 245,62 PLN
3314_0 - Silnik unipolarny 0.093 Nm 3314_0 - Silnik unipolarny 0.093 Nm 30,29 PLN
Freeduino ATMega168 Freeduino ATMega168 123,00 PLN


3523_0 - Pojemnościowy czujnik zbliżeniowy 8mm


3523_0 - Pojemnościowy czujnik zbliżeniowy 8mm
Powiększ zdjęcie

3523_0 - Pojemnościowy czujnik zbliżeniowy 8mm

PHI-3523_0

162,38 PLN

Product Features
  • Detects Metal, nonmetal materials (liquid, powder and granular materials)
  • Standard Detecting Distance: 8mm
  • Normally Open>
  • DC wire output
  • Requires a 12 to 30VDC Power Supply

Product Description
This capacitive proximity sensor is used for non-contact detection of metallic and non-metallic objects such as liquid, powder & granular materials; it can also detect materials through glass or plastic walls.
Note that the standard detecting distance is based on a standard shape approaching the sensor in a standard way. The real detecting distance will vary depending on the shape, thickness and type of material being detected.
You can adjust the operating distance by turning a screw placed on the side of the sensor.

This sensor connects to a Digital Input on any of the following products: This is how you connect the 3523 to a Phidget board that does not have 12V power such as the 1018, 1012, 1202, and 1203 using our 12VDC Power Supply:
  • Connect the +12 wire from the Power Supply (that's the one with the white line) to the 3523 Brown wire.
  • Connect the 3523 Black wire to a Digital Input on the 1018.
  • Connect the Power supply Ground Wire and the 3523 Blue wire to the Digital Input Ground connector on the 1018.
Connection
Note: When the 3523 is connected to a 1012, it will behave as a Normally Close (NC) sensor instead of Normally Open (NO).
For boards that have power input, if the supplied power is within 12-24VDC, the +V line can be connected to the terminal block, powering the sensor from the Phidget. The 1019, 1070, 1060 and 1063 all accept external power.
Connection
Related Products Comes packaged with:
  • 2 plastic rings
  • a screwdriver
Accessories
Resources Product Specifications
Characteristic Value
Detecting Distance 8mm (adjustable)
Hysteresis 3 to 20% of detecting distance
Setting Distance 0 to 6.4mm
Output Normally Open (NO)
Power Supply 10 to 30 VDC
Current Consumption ?15mA
Response Frequency 50Hz
Operating Indicator Yellow LED
Connection PVC Cable 2m
Ambient Temperature -25°C to +70°C
Ambient RH 35-95%RH
Protection Circuit Reverse polarity, surge, overload & short circuit
Protection Degree IEC IP67
Housing material PBT
Dimensions 18mm (width) x 78mm (length)


Dostępność

Przeciętny czas dostawy:

14d.gif
Zadaj pytanie o produkt

Najczęściej oglądane produkty

więcej kategorii


Odległość / zasięg (16)

Siła / ciśnienie (11)

Dotyk (4)

Ruch (12)

Środowisko (12)

Interface (8)

Napięcie / prąd (9)